inspector-signoff

Purpose

Execute Inspector sign-off deterministically so Foreman can continue.

This procedure is MANDATORY and must be executed as the final step of every Inspector run — even when blocked or when earlier steps fail.

Required behavior

• Always produce a Run Summary message with the required sections.
• Always write inspector_result.json to the worktree root.
• Always run validate_inspector_result and fix any issues it reports.
• If you are blocked or cannot complete review steps, still complete this procedure with your best available information.

Run Summary (MANDATORY format)

Your final chat output MUST include these sections:

1. Summary
   • 1–3 short bullets summarizing verdict and key findings.
2. Checks run + results
   • Commands you ran (e.g. pnpm lint, pnpm check, pnpm test:unit, pnpm prepack) and pass/fail, or why skipped.
3. Key issues
   • Important problems/risks (blockers/major issues).
4. Public API & A11y
   • Whether public API changes and accessibility are acceptable; call out concerns.
5. Next steps for Builder
   • High-level follow-up work expected from Builder (aligned with next_tasks in the JSON).
6. Checklist (TODO snapshot)
   • Print the current todowrite TODO list (all items + final statuses).

Foreman Handoff: inspector_result.json (MANDATORY)

You MUST write a JSON file named inspector_result.json in the repository/worktree root.

The file MUST contain EXACTLY one JSON object matching this schema:

{
  "run": {
    "status": "ok" | "failed",
    "failed_step": "..." | null,
    "error": "..." | null
  },
  "work": {
    "status": "approved" | "changes_requested",
    "issues": [
      {
        "severity": "blocker" | "major" | "minor",
        "description": "...",
        "paths": ["..."]
      }
    ],
    "next_tasks": ["..."]
  } | null
}

Rules:

• If run.status is ok, work MUST be an object.
• If run.status is failed, work MUST be null.
• The run.status CAN'T be failed if tool checks are returning errors i.e. pnpm lint that would be an issue that needs to get fixed by the builder agent.

After writing inspector_result.json, you MUST run validate_inspector_result and fix any reported issues until it passes.

If validate_inspector_result cannot be executed (tool missing/unavailable), treat it as a hard failure:

• set run.status = "failed"
• set run.failed_step = "validate_inspector_result"
• set run.error to the exact error output
• set work = null Then still write inspector_result.json and include the failure in the Run Summary.