Repowire Integration Test

Unified integration test for peer-to-peer communication across agent types.

Execution Modes

Argument	Behavior
claude-code	Test Claude Code agent type only
opencode	Test OpenCode agent type only
mixed	Test cross-agent-type communication
all or no argument	Run all three modes in parallel using agent teams

Team-Based Parallel Execution

When all is specified (or no argument), the lead agent should:

1. Run Phase 1 (environment discovery) and Phase 3 (pre-test teardown) itself
2. Ask user for project directories and opencode model (Phase 2)
3. Ensure daemon is running
4. Create tasks for each mode and spawn background agents in parallel:
   • Agent test-claude-code → runs claude-code tests
   • Agent test-opencode → runs opencode tests
   • Agent test-mixed → runs mixed tests (depends on both agent types being available)
5. Collect results and produce unified report

Spawning agents

Use the Task tool with run_in_background: true to run modes in parallel:

Task(subagent_type="general-purpose", run_in_background=true, prompt="Run the claude-code integration test. [paste mode section]")
Task(subagent_type="general-purpose", run_in_background=true, prompt="Run the opencode integration test. [paste mode section]")

Each agent gets the full context for its mode and runs independently.

Phase 1: Environment Discovery

Run these commands to understand current state. Keep all phases in the same shell so REPOWIRE_BIN continues to identify the exact binary under test.

# Pin every command in this workflow to one binary. Phase 4 replaces this with
# the freshly built checkout binary when a fresh install is requested.
REPOWIRE_BIN="$(command -v repowire || true)"
export REPOWIRE_BIN

# System checks
tmux list-sessions 2>/dev/null || echo "No tmux sessions"
which opencode 2>/dev/null || echo "opencode not in PATH"
which claude 2>/dev/null || echo "claude not in PATH"

# Daemon and peer status
curl -s http://127.0.0.1:8377/health 2>/dev/null | jq . || echo "Daemon not running"
curl -s http://127.0.0.1:8377/peers 2>/dev/null | jq '.peers[] | {name, status, circle}' || echo "No peers"

# Installation status
test -n "$REPOWIRE_BIN" && "$REPOWIRE_BIN" --version || echo "Repowire not installed"
jq -r '"Hooks: " + ((.hooks // {}) | keys | join(", "))' "$HOME/.claude/settings.json" 2>/dev/null || echo "No Claude hooks"
ls ~/.opencode/plugin/repowire.ts 2>/dev/null && echo "OpenCode plugin installed" || echo "No OpenCode plugin"

Phase 2: Ask User for Configuration

Ask user for:

1. Project directories (2-3 depending on mode, or ask for all if running all)
2. OpenCode model (e.g., anthropic/claude-sonnet-4-5-20250929) — needed for opencode/mixed modes
3. Fresh install? — removes existing hooks/plugins and reinstalls

Phase 3: Pre-Test Teardown (Always Run)

tmux kill-session -t circle-a 2>/dev/null || true
tmux kill-session -t circle-b 2>/dev/null || true
tmux kill-session -t opencode-test 2>/dev/null || true
tmux kill-session -t mixed-test 2>/dev/null || true
curl -s http://127.0.0.1:8377/health >/dev/null 2>&1 && {
  "$REPOWIRE_BIN" peer prune --force 2>/dev/null || true
}

rm -f ~/.repowire/pending/*.json 2>/dev/null || true
rm -f ~/.repowire/sessions.json 2>/dev/null || true

Phase 4: Fresh Install (if requested)

IMPORTANT: repowire setup calls claude mcp add which fails inside a Claude Code session. Run these commands in a tmux pane, not from within Claude Code.

# Run in a tmux pane (e.g. tmux send-keys to a spare window):

# Build from local source
cd /path/to/repowire
mkdir -p bin
(cd daemon-go && go build -o ../bin/repowire .)
REPOWIRE_BIN="$(pwd)/bin/repowire"
export REPOWIRE_BIN

# Setup hooks and MCP server
"$REPOWIRE_BIN" setup --no-service

# Verify
"$REPOWIRE_BIN" --version
jq -r '"Hooks: " + ((.hooks // {}) | keys | join(", "))' "$HOME/.claude/settings.json"
ls ~/.opencode/plugin/repowire.ts 2>/dev/null && echo "OpenCode plugin: OK"

Phase 5: Ensure Daemon Running

test -x "$REPOWIRE_BIN" || { echo "REPOWIRE_BIN is not executable: $REPOWIRE_BIN" >&2; exit 1; }
curl -s http://127.0.0.1:8377/health || {
  nohup "$REPOWIRE_BIN" serve > /tmp/repowire-daemon.log 2>&1 &
  sleep 3
}
curl -s http://127.0.0.1:8377/health | jq .

---

Mode: claude-code

Requires: tmux, claude CLI, Claude hooks installed Tmux sessions used: circle-a, circle-b Project directories needed: 3 (2 for circle-a, 1 for circle-b)

Setup

tmux new-session -d -s circle-a -n peer-a1
tmux new-window -t circle-a -n peer-a2
tmux new-session -d -s circle-b -n peer-b1

tmux send-keys -t circle-a:peer-a1 "cd $PROJECT_A1 && claude --dangerously-skip-permissions" Enter
sleep 3
tmux send-keys -t circle-a:peer-a2 "cd $PROJECT_A2 && claude --dangerously-skip-permissions" Enter
sleep 3
tmux send-keys -t circle-b:peer-b1 "cd $PROJECT_B1 && claude --dangerously-skip-permissions" Enter
sleep 30  # Wait for sessions to initialize and hooks to register

Verify Registration

# All 3 peers should be online with correct circles and peer_id format
curl -fsS http://127.0.0.1:8377/peers | jq -e --arg a1 "$PEER_A1" --arg a2 "$PEER_A2" --arg b1 "$PEER_B1" '
  def valid($name; $circle):
    [.peers[] | select(
      .name == $name and
      .status == "online" and
      .circle == $circle and
      (.peer_id | test("^repow-" + $circle + "-[a-f0-9]{8}$"))
    )] | length == 1;
  if valid($a1; "circle-a") and valid($a2; "circle-a") and valid($b1; "circle-b") then
    [.peers[] | select(.name == $a1 or .name == $a2 or .name == $b1) |
     {name, status, circle, peer_id}]
  else
    error("registration assertion failed: expected exactly one online peer for each name with the correct circle and peer_id")
  end
'

If a peer doesn't register, check .claude/settings.local.json for disableAllHooks: true.

Tests

1. Direct query to peer-a1

   "$REPOWIRE_BIN" peer ask $PEER_A1 "What is this project about in one sentence?" -t 120
   

   Expected: Direct response describing the project.

2. Peer-to-peer proxy (peer-a1 → peer-a2 via MCP ask_peer)

   "$REPOWIRE_BIN" peer ask $PEER_A1 \
     "Use the ask_peer tool to ask $PEER_A2: What is this project about in one sentence? Return their exact response." \
     -t 180
   

   Expected: peer-a1 responds with peer-a2's answer.

3. Circle verification

   curl -s http://127.0.0.1:8377/peers | jq '.peers[] | select(.circle == "circle-a") | {name, peer_id}'
   

4. Event chain

   curl -s http://127.0.0.1:8377/events | jq '.[-10:]'
   

Cleanup

tmux kill-session -t circle-a 2>/dev/null || true
tmux kill-session -t circle-b 2>/dev/null || true
"$REPOWIRE_BIN" peer prune --force 2>/dev/null || true

Success Criteria

• All 3 peers registered with peer_id format repow-{circle}-{uuid8}
• Peers in correct circles (circle = tmux session name)
• Direct query via CLI: PASS
• Peer-to-peer proxy query via MCP: PASS

---

Mode: opencode

Requires: opencode CLI, OpenCode plugin installed at ~/.opencode/plugin/repowire.ts Tmux sessions used: opencode-test Project directories needed: 2 Model flag needed: e.g., --model anthropic/claude-sonnet-4-5-20250929

Important Notes

• OpenCode does NOT accept tmux send-keys for prompt submission (alternate screen mode). All query injection goes through the SDK plugin via session.prompt().
• OpenCode sessions need a warmup prompt (via tmux send-keys) to create an active session before repowire queries work.
• The --model flag must specify a working model. LiteLLM proxy models may return 404.

Setup

tmux new-session -d -s opencode-test -n peer-1
tmux new-window -t opencode-test -n peer-2

tmux send-keys -t opencode-test:peer-1 "cd $PROJECT_1 && opencode --model $OPENCODE_MODEL" Enter
sleep 3
tmux send-keys -t opencode-test:peer-2 "cd $PROJECT_2 && opencode --model $OPENCODE_MODEL" Enter
sleep 10

# Warm up: send initial prompt to create sessions
tmux send-keys -t opencode-test:peer-1 -l "hi"
tmux send-keys -t opencode-test:peer-1 Enter
sleep 2
tmux send-keys -t opencode-test:peer-2 -l "hi"
tmux send-keys -t opencode-test:peer-2 Enter
sleep 30  # Wait for warmup to complete

Verify Registration

curl -s http://127.0.0.1:8377/peers | jq '
  [.peers[] | select(.backend == "opencode" and .status == "online") |
   {name, peer_id, backend}]
'

Tests

1. WebSocket connection & peer discovery

   curl -s http://127.0.0.1:8377/peers | jq '.peers[] | select(.backend == "opencode") | {name, status, peer_id}'
   

   Expected: Both peers online with repow-{circle}-{uuid8} format.

2. Direct query to peer-1

   "$REPOWIRE_BIN" peer ask $PEER_1 "What is this project about in one sentence?" -t 120
   

   Expected: Response from the model (not "empty response" or "Not Found").

3. Peer-to-peer proxy (peer-1 → peer-2)

   "$REPOWIRE_BIN" peer ask $PEER_1 \
     "Use the ask_peer tool to ask $PEER_2: What is this project about in one sentence? Return their exact response." \
     -t 180
   

4. Reverse proxy (peer-2 → peer-1)

   "$REPOWIRE_BIN" peer ask $PEER_2 \
     "Use the ask_peer tool to ask $PEER_1: What is this project about in one sentence? Return their exact response." \
     -t 180
   

Troubleshooting

Symptom	Cause	Fix
"No active session"	Warmup prompt didn't create session	Press Enter manually in opencode pane, or wait longer
"(empty response)"	Model returned 0 parts	Check model config — switch to anthropic/claude-sonnet-4-5-20250929
"Not Found" in TUI	LiteLLM model ID not recognized	Use --model anthropic/<model-id> directly
Plugin not connecting	Wrong WS URL or old plugin	Reinstall with "$REPOWIRE_BIN" setup --no-service

Cleanup

tmux kill-session -t opencode-test 2>/dev/null || true
"$REPOWIRE_BIN" peer prune --force 2>/dev/null || true

Success Criteria

• Both peers registered via WebSocket with repow-{circle}-{uuid8} peer_id
• Direct query returns real model response (not empty/error)
• Bidirectional peer-to-peer proxy queries: PASS

---

Mode: mixed (Cross-Agent-Type)

Requires: Both claude-code AND opencode setups working Tmux sessions used: mixed-test Project directories needed: 2 (1 for claude, 1 for opencode) Depends on: claude-code and opencode modes passing individually first

Setup

tmux new-session -d -s mixed-test -n claude-peer
tmux new-window -t mixed-test -n opencode-peer

tmux send-keys -t mixed-test:claude-peer "cd $PROJECT_CLAUDE && claude --dangerously-skip-permissions" Enter
sleep 3
tmux send-keys -t mixed-test:opencode-peer "cd $PROJECT_OPENCODE && opencode --model $OPENCODE_MODEL" Enter
sleep 10

# Warm up opencode peer
tmux send-keys -t mixed-test:opencode-peer -l "hi"
tmux send-keys -t mixed-test:opencode-peer Enter
sleep 30

Tests

1. Cross-agent-type registration

   curl -s http://127.0.0.1:8377/peers | jq '.peers[] | select(.status == "online") | {name, backend, peer_id}'
   

2. Claude → OpenCode proxy

   "$REPOWIRE_BIN" peer ask $CLAUDE_PEER \
     "Use ask_peer to ask $OPENCODE_PEER: What is this project about in one sentence? Return their response." \
     -t 180
   

3. OpenCode → Claude proxy

   "$REPOWIRE_BIN" peer ask $OPENCODE_PEER \
     "Use ask_peer to ask $CLAUDE_PEER: What is this project about in one sentence? Return their response." \
     -t 180
   

4. Event chain

   curl -s http://127.0.0.1:8377/events | jq '.[-10:]'
   

Cleanup

tmux kill-session -t mixed-test 2>/dev/null || true
"$REPOWIRE_BIN" peer prune --force 2>/dev/null || true

Success Criteria

• Both agent types register with repow-{circle}-{uuid8} peer_id
• Claude → OpenCode proxy: PASS
• OpenCode → Claude proxy: PASS

---

Phase 6: Unified Report

Aggregate results from all modes into a single report:

==========================================
  REPOWIRE INTEGRATION TEST RESULTS
==========================================

  MODE: CLAUDE-CODE
  ├ Registration:    PASS/FAIL (X/Y peers)
  ├ Direct query:    PASS/FAIL
  ├ Proxy query:     PASS/FAIL
  └ Status:          PASS/FAIL

  MODE: OPENCODE
  ├ Registration:    PASS/FAIL (X/Y peers)
  ├ Direct query:    PASS/FAIL
  ├ Proxy query:     PASS/FAIL
  └ Status:          PASS/FAIL

  MODE: MIXED
  ├ Registration:    PASS/FAIL
  ├ Claude→OC:       PASS/FAIL
  ├ OC→Claude:       PASS/FAIL
  └ Status:          PASS/FAIL

  Overall: PASS/FAIL
==========================================

Phase 7: Final Teardown

tmux kill-session -t circle-a 2>/dev/null || true
tmux kill-session -t circle-b 2>/dev/null || true
tmux kill-session -t opencode-test 2>/dev/null || true
tmux kill-session -t mixed-test 2>/dev/null || true
"$REPOWIRE_BIN" peer prune --force 2>/dev/null || true

Quick Reference

"$REPOWIRE_BIN" serve                    # Start daemon
"$REPOWIRE_BIN" peer ask NAME "q" -t 120 # Query a peer
curl -s localhost:8377/peers | jq  # List peers
curl -s localhost:8377/events | jq '.[-5:]'  # Recent events
"$REPOWIRE_BIN" peer prune --force       # Remove offline peers